주요 콘텐츠로 건너뛰기

Repair guides and support for televisions manufactured by Panasonic.

576 질문 전체 보기

Red light blinking 5 times

I have a 55 inch, 56 series LED Panasonic.. Red light blinking 5 times..... I put in a new power board. Fired it up. The Smart TV logo came up, looked like it was going to work, then POP an electronic sound no-one wants to hear. Back to the 5 blinks. Any thoughts!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

A blown fuse in a power supply is almost always caused by a shorted diode, but may be caused by an overload on the PSU. Since you disconnected the PSU from the load, the main issue to fix is on the PSU. A shorted diode is usually just a defective diode but may be caused by the overload. So, start by checking all diodes on the PSU. Also verify there are no bad capacitors.

Verify the loads on the PSU are not too low a resistance, replace the diode(s), fuse, and/or capacitors and try again.

Note: the diodes include bridge rectifiers.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

@kfifer since this is (was) a new PSU, it stands to reason that the issue is not related to the PSU, but what happens around it. If you have a voltmeter, check the voltage going into your TV. Let us know what you find out. Next we need to know what exact model your TV is. After that post some good pictures of all of your boards with your QUESTION. That way we can see what you see. 기존 질문에 이미지 추가하기

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Kevin Fifer 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 25