주요 콘텐츠로 건너뛰기

Released in 2015, the Thinkpad T450 is a lightweight, sturdy 14" business notebook that ships with a 5th generation Intel processor. The device was published in 2015

8 질문 전체 보기

Ive lenovo t450 that restarts for installing win 10 update and died

My lenovo t450 dief after restarts for installing win 10 update and didnt do anything since then i.e no power no charging led no display no nothing at all dead litrally

Ive tried every possible solution i found on youtube, send it to repair shop and no solution yet

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Hi @mohammed8989

If you have a DMM (digital multimeter) check if there is 20V DC on the red and black wires on the plug of the DC-In jack in the laptop (supplier example only to show part), when the charger is connected

What can sometimes happen is the centre pin in the jack breaks internally and this opens the +ve leg of the power connection between the charger and the motherboard.

If this happens then the motherboard receives no power to operate i.e. no charging LED and the battery won't be charged either.

Here's the hardware maintenance manual for the laptop. Go to the bottom of p.78 to view the procedure to remove/replace the DC-In cable assembly. You really only have to gain access so that you can unplug the cable from the board and then check if any voltage is present on the wires when the charger is plugged in.

If the jack is faulty it cannot be repaired, it has to be replaced. Search online for Thinkpad T450 DC-In jack to find suppliers that suit you best.

If the jack is OK then there's a problem on the motherboard and further testing using the schematic diagrams for the board would be needed to find the problem.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

Im sorry i didnt have enough time to check but today while disassembling the laptop and getting the motherboard out ive noticed that the (thinkengine tb62d516fg ic) is overheated and burnt a little

@mohammed8989

It controls a lot of functions as it is a power management IC combined with an embedded controller.

It is used for temperature and voltage monitoring and power management.

It may take a while to find out why it overheated, so you'll definitely need the schematics.

Not sure but if the motherboard is an NM-A251 or NM-A252 search online the schematics for that board model.

댓글 달기

귀하의 답변을 추가하세요

Mohammed Al_Fadhly 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 37