주요 콘텐츠로 건너뛰기

Repair and troubleshooting documentation for Frigidaire dishwashers.

11 질문 전체 보기

Frigidaire Gallery dishwasher fgip2468uf

This dishwasher has started to not drain in all wash cycles. I can put it in diagnosic mode and fill it with water then make the pump drain and it's fine. If we put it in normal rinse mode it drains just fine. I've made sure the filter is clean and also made sure nothing is in the drain area by the little ball.

Any suggestions would be greatly appreciated

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

가장 유용한 답변

Hi @ggoldsm590

Do you get an error code if you run the diagnostic service test #7 i.e. drain test?

If you haven't already got it here's the service data sheet that may help.

해당 답변은 도움이 되었습니까?

점수 1

댓글 5개:

No the drain test runs just fine. This it what's so confusing

@ggoldsm590

Wonder if there's a problem with the drain flapper valve.

It supposed to prevent backflow from the drain although why the dishwasher works OK in rinse only idk unless there's a problem with the household drain that the dishwasher drain pipe is connected to is not draining quickly enough

No issue with the kitchen drain pipe at all. It's just very weird

@ggoldsm590

Maybe worth checking the flapper anyway just in case it is sticking closed

I'll pull the unit out and check it this weekend

댓글 달기

귀하의 답변을 추가하세요

Gary Goldsmith 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 1

7일 전: 8

30일 전: 28

전체 시간: 168