주요 콘텐츠로 건너뛰기

Model A1059 or A1099 / 20, 40, or 60 GB hard drive / touch sensitive click wheel

227 질문 전체 보기

iPod Classic: lost headphone ribbon cable clamp

I was just replacing the battery in my iPod classic and I pulled on the case just a touch too hard. The ribbon cable that controls the Headphone Jack and Hold Switch came loose from the motherboard. No big deal.

But when I tried to flip open the lock on the cable bracket/connector, the lock flew off the unit and into nowheresville. I can't find it anywhere. There is no damage to the actual cable connector, except that it is now missing the lock to press the cable securely.

Is there a replacement (without getting a new motherboard) for this fiddly little clamp? Or a reliable way to fabricate a replacement without fear that I'll have to keep opening the case to play with the connection?

Thanks!

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

I think it's this one? https://www.ebay.co.uk/itm/265063671321 (I realise it's the batter connector, but it might fit the headphone socket too maybe?)

Done this myself as well, but I was lucky enough to be able to find it afterwards

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Jeffrey L Bromberger 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 14

전체 시간: 46