Fans blaring and Black screen After upgrading HDD

Question

iMac Intel 27" Retina 5K Display 2019

A2115 / 2019 / 프로세서 3.0GHz 6코어 i5부터 최대 3.6GHz 8코어 i9까지. 2019년 3월 19일 출시.

131 질문 전체 보기

ChrisM @chrism56542

평판: 1

게시일: 2023년 9월 21일

옵션

Fans blaring and Black screen After upgrading HDD

Hello, I just upgraded my internal Micro Blade SSD with a 2TB OWC Acura Pro SSD. I also added an internal HDD, and upgraded the RAM. Once I had everything put back together and sealed up the computer won’t boot past a black screen. You can hear the chime but nothing but a totally black screen. Also the fans come on full speed. I installed the HDD thermal sensor that OWC provided with the hard drive. Any ideas what might be the problem?? Please advise

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 0

댓글 달기

답변 1개

Dan @danj 평판: 479.7k Self employed contract worker 35 329 971 · Answer 1 · 2023-09-22T03:50:52-07:00

Dan @danj

평판: 479.7k

Self employed contract worker

35

329

971

게시일: 2023년 9월 22일

옵션

Well with so much change without cross checking after each change makes diagnosing the problem very hard.

You’ll need to undo some of the changes you did. I would start off reverting the RAM as it’s the easiest. Take our the new RAM and put back the original RAM. Next put back the original drive.

Put it’s also possible you damaged the display or it’s cables! If this was the first time working on a Mac and didn’t follow our guide and use the correct tool it’s not uncommon. This could be an expensive repair!

iMac Intel 27" Retina 5K Display 2019 디스플레이 교체

Until you know the system is working hold off remounting the display and make sure you use the correct tapes!

iMac Intel 27" Retina 5K Display 2019 Adhesive Strips Replacement