기기를 수리하세요 커뮤니티 상점

6 질문 전체 보기

옵션

Windows won’t boot after enabling SVM

I am taking a coding class and was instructed to enable SVM in my BIOS settings. Now after enabling it, Windows won’t boot. It says “there was a problem starting your PC” and just continues in this loop forever. I went back in to troubleshooting and restored the BIOS settings back to what they were, but it still won’t boot. I tried opening the laptop up and taking out the CMOS battery for a minute then turning it on again but same issue.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Apparently this is a known issue. Great eh!

  • Just go into the BIOS/UEFI and set settings to Default by mouse click or pressing <F9> key. That should do it.
  • (this for other readers) This video is for the FX504 but the instructions are probably similar for the FX505.

ASUS TUF Gaming FX504 CMOS Battery

  • Did you disconnect the charger and the main battery when you took out the CMOS battery and press the power button to discharge any residue electricity?
  • Some suggest reflashing the UEFI/BIOS.
  • I would also run a full virus/ malware scan to be safe.

Let know how it goes.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Teostra 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 7

전체 시간: 63