기기를 수리하세요 커뮤니티 상점

Repair guides and support for tablets produced by Lenovo including the ThinkPad tablet line.

469 질문 전체 보기

옵션

Replacement LCD panel does not have rubber (heatsink?) backing

I’m replacing the broken LCD panel on my Lenovo tab M8 HD. I’ve noticed that the replacement panel I ordered does not have a square piece of rubber with punched holes attached to the back of it, as the OG panel does. See below.

Block Image

I’m not sure what the material is, but it does feel like a thin thermal pad. I’m wondering if not having that pad on the back of the replacement panel is going to be any kind of long-term problem. Should I buy a thermal pad, and affix it to the replacement panel as a precaution?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된

옵션

Hi @plunderkind

It is a thermal pad.

Here's the parts list for the tablet (I think).

Click on Machine Type > Select Commodity > Die-Cut Pieces\Double sided adhesive and foam (10).

The only one that I think may be it is the one listed as TB-8705 LCD Mylar&*712498328101 CS, Part No 5D78C16014.

When searching online for the part number there are other suppliers but unfortunately none show any images of the part either, so I can't verify that it is it. You could always contact Lenovo and ask them I suppose.

I would try to gently peel it off the back of the screen and place it on the new one.

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

danyon@gmail 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 37