주요 콘텐츠로 건너뛰기

광범위한 타자기 수리 안내서 및 지원.

10 질문 전체 보기

Tabulator on Smith Corona Classic 12 is not working?

I have Smith Corona typewriter Classic 12 that I had polished up and refurbished. It was working until (I think) it fell off my desk. It seems now the Tabulator is not working to set tabs. There is a set button on the top to the left, tabulator in the middle, and clear button on the right. When I set it to a position for tabbing and then press the tab key, it either skips ahead a space or get to the position a space before, and then also doesn't stop at all. I tried clearing it after moving the moving piece to complete right and then hit clear. Still the problems persists. I looked at all the springs, the ones I could see at least, but everything looks intact. I don't know if its the teeth or soemthing else, but any help appreciated. thx.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 1개

선택된 답변

Hi @craigharri89662

Here's a link to an online Smith Corona Standard Typewriter Repair manual.

If you scroll down through the manual, towards the bottom (there's no page numbering in the manual) there's a section dealing with the Tabulator Set and Clear function.

Hopefully this may be of some help.

해당 답변은 도움이 되었습니까?

점수 1
댓글 달기

귀하의 답변을 추가하세요

Craig Sholl 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 30

전체 시간: 101