기기를 수리하세요 커뮤니티 상점

2.2, 2.4, 2.5, 또는 2.6 GHz Core 2 Duo 프로세서

759 질문 전체 보기

옵션

Fans run maximum speed but in Setting show fan speed is 0rpm

when i turn power on

not happend and my MBP not run

then

- Unplug the battery.

- Unplug the magsafe power cable.

- Hold down the powerbutton for about 10 sec and continue to do that.

- While still holding the powerbutton down, insert the magsafe power cable and hold it for another 10 sec.

- Release the powerbutton after those 10 sec and make a "normal" press as if you would normally

and my MBP turn on

but my fans run maximum speed & in setting show fan speed is 0rpm and heatsink temperture is 0 C

PLEASE HELP ME

THX

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

That process bypasses the SMC and/or POST tests. Your firmware/EFI may have had a glitch or you may have some hardware issues. Since that process bought the laptop out of it's coma and it now starts again. Reset your PRAM and SMC in that order.

To reset the PRAM: Shut down the computer. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously while the system is booting. Turn on the computer. Press and hold the Command-Option-P-R keys all at the same time. You must press this key combination before the gray screen appears. Hold the keys down until the computer restarts and you hear the startup sound for the second time. Release the keys.

Now reset your SMC, which is very similar to what describe you did in the information you gave. Remove your battery. Unplug the magsafe. Hold power button down for 10 seconds. Let go of power button. Replace battery. Plug in magsafe and hit the power button as normal.

If there was just a glitch in your system your laptop should run normal now. If it does not there is a hardware issue that the SMC is detecting and stopping the system from starting to prevent damage.

Please let us know the results of my suggestions.

해당 답변은 도움이 되었습니까?

예 아니요
점수 3

댓글 6개:

Well written, concise, detailed answer.

의

noting changed :((((((

의

If you reset the SMC correctly the fan speeds will drop to normal and the sensors will read again. If there is a hardware problem then the laptop may not start again until you bypass the SMC through your original process. Maybe you will understand how Apple explains to reset the SMC better than you understood me. Here is a link to how to reset the SMC: http://support.apple.com/kb/ht3964 Please follow the directions exactly and do not preform the process you described in your information. The fans are running high with sensors saying they are at 0 and there are no temperature readings because the SMC has been told to not respond.

의

thanks man

you're genius

의

but now my MBP not turning on without battrey !!!!!!!?

의

댓글 1개 더보기

댓글 달기

귀하의 답변을 추가하세요

ashkan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 4,043