주요 콘텐츠로 건너뛰기

2020년 3월에 출시된 인텔 프로세서가 탑재된 MacBook Air 모델 A2179의 2020년 리프레시 수리 및 분해 정보입니다.

103 질문 전체 보기

New battery installed and won’t get past Apple logo

Hi all, I have a MacBook Air A2179 and I had just installed a new battery as it previously would not get past the Apple logo and the cpu would get hot.

Once I remove the charger the laptop turns off straight away. Since the screen is attached it has to be connected to an external display.

I have attempted to reset SMC and PRAM as required but no change.

I have seen alot of others have the same symptoms and am reaching out for assistance as I have installed a new battery. I have attached photos of the board.

The battery connector is hot and the white light is on but the yellow light next to it is not.

Block Image

Block Image

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0
댓글 달기

답변 2개

선택된 답변

Well I’ve got some bad news here as you have a logic board issue within the charge control logic. There is a set of MOSFETs that often fail this will require someone with good micro soldering skills as Apple packed this board way to tight! Otherwise you’ll need a new logic board.

해당 답변은 도움이 되었습니까?

점수 1

댓글 2개:

It’s got power thought and boots to Apple logo that’s it. I might as well just sell it at this point.

I’ve started a return for the battery and listed my MacBook for sale. Seems like too much of an issue for me to learn how to solder and fix this (I’d like to).. Also throwing more money at it won’t help. Best bet is to save up money and buy an Apple Silicon.

댓글 달기

I think that the battery is defective. Without a working battery connected, this model will throttle the processor so hard that it takes an indefinite amount of time to boot.

해당 답변은 도움이 되었습니까?

점수 0

댓글 1개:

A working battery which I've tested as it can still power on and stay on this screen without being charged, works. I'm doubting that it would be a defective battery. I'm familiar with your answer, as I've seen it on another Macbook I own. But I'm more leading to maybe a screen not attached or the power management system?

To future viewers, I'm willing to learn to test if this is the case with a multimeter and such, not sure how to take upon the scary board schematics. :D

But OP, thanks for trying to assist.

댓글 달기

귀하의 답변을 추가하세요

Fire Aussie 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 6

전체 시간: 66