기기를 수리하세요 커뮤니티 상점

식기 세척기 수리와 분해 안내서 및 지원.

707 질문 전체 보기

옵션

Midea MDT24H3AST dishwasher error

About a week ago or so, my water lines froze, before the freeze, my dishwasher was working.

I tried last night to wash a load and found out that the dishwasher is erroring out with the delicate light flashing. From what I could find, it means drain hose may be plugged or filter may be dirty.

I poured water inside of the unit to see if it pumps out water, and from what I can see, it appears to be normal. I even sucked out as much water as I could out of the hose to see if it would stop throwing the error, but alas that did not work.

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 2
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

Hi @ndowens04

Here's the service manual for the dishwasher.

Run the diagnostic tests as described on p.27 and check what error codes are shown.

The error code meaning are on p.28→p.29. The error LEDs are in a binary format. To convert binary to decimal the numbering is from right to left i.e. Binary digits decimal value = 8 4 2 1 e.g. decimal 9 = binary 1001 (8+1), decimal 3 = binary 0011 (2+1) etc. Apologies if you knew how to do this already.

If you find a part that is faulty and needs replacing (stuck overflow switch?, faulty water inlet valve?) here's the parts list for the machine. Locate the wanted part to find the part number for the part and then search online for the part number only to find suppliers that suit you best.

On p.30 there's a wiring diagram that may also help.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

귀하의 답변을 추가하세요

Nathan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 3

7일 전: 26

30일 전: 131

전체 시간: 319