기기를 수리하세요 커뮤니티 상점

시대의 변화에 따라 USB to Lightning 케이블에서 USB 단자만 USB-C 단자로 변경된 Apple 정품 케이블.

2 질문 전체 보기

옵션

Can you make a USB-C to USB-C cable from 2 USB-C to Lightning cables?

With several old USB-C to Lightning cables and now no need for the lighting side of them, is it possible to cut off the lighting ends of two cables and splice them together to make a longer USB-C to USB-C cable?

It seems like with the circuitry and resistors already in place on the factory USB-C ends it would be a simple strip and solder job on the corresponding wires, but wanted to check with wiser minds here before trying.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 답변

옵션

Hi @spiralingshape

Here's a link showing the pinout for a USB-C cable.

This should help you to wire a USB-C connector in at the other end of the cable.

Not sure what you mean by "...with the circuitry and resistors already in place on the factory USB-C ends..." though.

There's only wires in the cables unless you meant in the USB-C controllers in the devices that they connect to.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 2개:

Thanks! Regarding the ends of the cable, I assume there is circuitry in there to manage power and data properly. I also assume that if those ends are left alone (only splicing wires in the middle one-to-one) everything should function correctly. Just making sure I'm not missing something that might be in those cables that wouldn't allow for this type of combining.

의

@spiralingshape

All the power management is done by the USB-C controllers in the devices depending on what wire has a signal on it from the other end.

Click on the link underneath the pinout for more information about specific USB-C cable types as they can vary.

Just make sure that you don't reverse any connections i.e. wrong wire on wrong pin when testing from end to end

의

댓글 달기
가장 유용한 답변

옵션

this might be helpful to you

USB-C to lightning wiring diagram

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thanks, I saw that one, but since this isn't touching the ends of the cables, only soldering the wires in the middle, I wasn't sure if it was as simple as that or if there were any considerations about the cable functioning properly.

의

댓글 달기

귀하의 답변을 추가하세요

spiralingshape 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 22

전체 시간: 72