기기를 수리하세요 커뮤니티 상점

Nintendo's upgraded version of the Nintendo 3DS. It features bigger screens, longer battery life, better pixel density, and a better design.

412 질문 전체 보기

옵션

Unable to remove stripped screw from 3DS XL using screw extractor

Block Image

Block Image

I’ve decided to try and fix my 3DS as I have a bad B button. Upon opening the back panel I remove the battery and one of the screws is already stripped? I never taken this 3DS apart before and I think I made it significantly worst and I’m unsure on how I can get it out. I’ve spent money already on screw extractors but this 2mm extractor doesn’t seem to be drilling into the stripped screw. I’ve tried the rubberband but my screw driver and drill just go right through it and rips a hole. Anyone have any other ideas on what I can do??

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 1
댓글 달기

답변 2개

필터:
가장 유용함 가장 최근 가장 오래된
가장 유용한 답변

옵션

You can get steel-loaded epoxy putty which is very strong. It comes as a stick and you cut off a bit and nead it in your hands until the two parts are throughly mixed. Then press it into the screw head (clean it with isopropyl alcohol first to make sure there are no traces of grease). Before it sets, press a screwdriver bit into it to make a new screw head. Let it set for 24-48 hours then try with the same screwdriver bit, pressing as hard as you can.

해당 답변은 도움이 되었습니까?

예 아니요
점수 1
댓글 달기

옵션

@dirkhardpeck and if rubber bands and epoxy do not work, it'll be time to drill out the screw. First you need a bit the size of the inside of the Phillips head (red circle). That will keep the bit true and won't run off. Once you have that pilot hole drilled, get a slightly bigger bit (turquoise circle) and drill into the screw. It will not take long until the screw head will fall off. Once you have the casing deparated, use a pair of pliers to replace the rest of the screw,

Block Image

해당 답변은 도움이 되었습니까?

예 아니요
점수 0
댓글 달기

귀하의 답변을 추가하세요

Tapioca 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 11

전체 시간: 46