주요 콘텐츠로 건너뛰기

모델 A1419 / EMC 2806 / Late 2014 또는 Mid 2015. 3.3 또는 3.5 GHz Core i5 또는 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 late 2015 / 3.3 또는 3.5 GHz Core i5 또는 4.0 GHz Core i7 (iMac17,1) 모두 Retina 5K 화면 장착

573 질문 전체 보기

Can I test the 27” 5k screen on a 21.5 model?

I took the screen off a mid 2015 27” iMac to swap out the HDD for an SSD. Stupidly I didn’t realise it had on board SSD, however when I reassembled, the screen would not fire up, and now the fan comes on full speed. I’ve replaced the wide cable but still no life - I do get 3 LEDs, but not the fourth. I want to find out if the screen is dead or not, can I connect it to a 21.5” iMac logic board to see if it will work?

이 질문에 답하기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글 2개:

How did you take it apart? Did you follow a guide?

I followed a video guide but the monitor leads were

Very difficult to get off the logic board. I’ve done this before with a 21.5” and it went absolutely fine

댓글 달기

답변 1개

While I am not too sure about the 21.5" and 27" screens being cross-compatible with each other, I do have a feeling that this may not be possible judging by how Apple is.

However, what you could do is connect an external monitor to your iMac, and see if it shows an image instead of just trying to hook up a proprietary display that probably wont work with your model of iMac.

해당 답변은 도움이 되었습니까?

점수 0
댓글 달기

귀하의 답변을 추가하세요

Garfy 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 25