옵션

TV screen damage after disassembly?

I was given an LG 50UH5530 for free that had a backlight problem. I replaced the backlight strips ok, but now the picture on the right half of the screen isn't displaying greys correctly. Pure white shows up with slight red tint, black and even colors seem ok, but any mid-grey tones just show up as black. I swapped the ribbon cables to the driver boards and the problem stayed on the same side. Did I ruin the display while I was poking around in there, or is there additional troubleshooting I can do for this?

^ Pure black/white ok, but greyscale all messed up

^ meant to be pure grey screen

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

게시일: 2024년 4월 26일

옵션

@kylemartin72918 that could still be a backlight issue if you got some "not so high quality" strips. It is also possible that this is related to issues with the driver boards. Check your voltages on the T-con board (use the big inductores to measure) since it is possible that your Gamma IC may be having issues. Of course, double check your work and make sure that all the diffuser sheets etc are properly installed etc.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thanks! I combed over everything and found a small crack in the panel. Not sure if it happened during or before my repair, but I think that's what did it.

Kyle Martin 의 2024년 4월 29일

댓글 달기

LG Television

TV screen damage after disassembly?

답변 1개

귀하의 답변을 추가하세요