기기를 수리하세요 커뮤니티 상점

14 질문 전체 보기

옵션

GE Profile JGP975SEK1SS Cooktop Spark Electrodes

Block Image

I have the GE Profile JGP975SEK1SS cooktop and teh Spark Electrodes to light the gas have gone bad. To get to teh electrodes one needs to remove the Maintop assembly. It is held with some screws that I am able to remove but the head burner on the front left side has an element sticky out that I am unsure what it is and whether it can be safety removed. Looking at the diagram for this cooktop it could be the Screw Simmer Base Inj WB01T10093 / AP3868728 but I am unsure. And not sure what to use to remove it.

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요
점수 0
댓글 달기

답변 1개

필터:
가장 유용함 가장 최근 가장 오래된
선택된 해법

옵션

Hi @lakerfan

I think that the component that you're referring to is the remnants of something that looks like part # WB13K10014 (part # 154 on the parts diagram)

Here's a video that shows how to replace that part if that is what it is.

The torx head screw (part ID 122/ part # WB01T10093) is on the opposite side to what you've highlighted

Here are some images of what I think are the 3 components in the top of the burner

Block Image

Block Image

(click on images)

Search online for the part number to find suppliers that suit you best.

해당 답변은 도움이 되었습니까?

예 아니요
점수 2

댓글 1개:

Thanks for the link to the video. Did not realize you could pop off the ignitor without removing the top. That was great help. Thanks again!!

의

댓글 달기

귀하의 답변을 추가하세요

laker-fan 님은 대단히 고마워 할 것입니다.
조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 45