My GE Profile door ice maker stopped dispensing ice. I replaced the auger motor. Still does not turn the auger. The ice maker still makes ice and the flap on the door dispenser shut opens and closes as it should.
What is my next troubleshooting step ??
좋은 질문입니까?
평판: 521.2k
11
398
1.5k
Hi @tony94671
Here's the mini manual for the refrigerator.
Enter the service diagnostics as described by the guide and check if any error codes are shown.
There's a Fa i l u r e Co d e Def i n i t i o n table (codes 600-699) for the ice maker showing what the codes mean.
There's also a Door wiring diagram on p.3 (left side) showing the wiring connections for the ice maker that may also help.
Don't know your model but assume that the ice maker is in the refrigerator door and not the freezer?. If it is run service diagnostic test 00 66 FF Door Icemaker Rake Motor. (if it is in the freezer then run test 00 59 FZ Icemaker Rake Motor Test) to see if it works or not.
Note FF = refrigerator section, FZ = freezer section
이 답변이 도움이 되었나요?
I'll give it a try - Thanks
지난 24시간: 1
지난 7일: 2
지난 30일: 11
전체 시간: 87
댓글 2개
Hi @tony94671
What is the full model number of the refrigerator?
jayeff 의
The Model number is PFE28KSKLSS
Tony 의