주요 콘텐츠로 건너뛰기

Model No. A1367 / 8, 16, 32, or 64 GB capacity

1302 질문 전체 보기

Battery connection pods on board

I have accidentally removed the pod on the pcb board of the iPod. It's the one in the middle. Does someone have a diagram of what each of those pods do and a possible fix? Thank you! Ps- I still have the removed pod. Any ideas?

*bump*

답변되었습니다! View the answer 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

점수 0

댓글:

Chris, I assume you are talking about the solder pads?

의 답변

의견 추가하세요

2개의 답변

선택된 해법

chris, if you are talking about the solder pads, take a look at the attached image. It is from a 3rd gen but should still be the same. If your pad came of the board, it can be tricky to repair it again. Take a look at this video. Decent tutorial and it might help you to see what you are up against. If you have difficulty soldering etc, then you could try something like this epoxy.

Block Image

해당 답변은 도움이 되었습니까?

점수 2

댓글:

While the information provided is good the solder points are different on the 3rd gen.

의 답변

의견 추가하세요

Posted about this outside.

http://www.techjamaica.com/forums/showth...

That is for the A1367 4th Gen iPod Touch. Hope it helps.

해당 답변은 도움이 되었습니까?

점수 1
의견 추가하세요

귀하의 답변을 추가하십시오

Chris 가/이 대단히 고마워 할 것입니다.
조회 통계:

지난 24시간: 2

지난 7일: 3

지난 30일: 8

전체 시간: 2,458