MBP is Dead after plug in in of a USB harddrive

Question

MacBook Pro 17" Unibody

모델 A1297 Unibody: 2009 상반기, 2009 중반기, 2010 중반기, 2011 상반기 & 2011 하반기

544 질문 전체 보기

felusch @felusch

평판: 35

3

1

게시일: 2012년 7월 1일

옵션

MBP is Dead after plug in in of a USB harddrive

Hello,

As I pluged in a USB-Harddrive into the Macbook, it powered totaly off imediately and is dead now.

- Battery LED´s does not light when I press the knob

- The magsafe LED is very dark green and a bit flashing (but not as bright as normaly)

The SMD reset does nothing

Is there a fuse on the board?

is there a chance that it is the RAM?

Is it possible that the MagSafe LED gives error codes?

how much would cost a logic board?

Thanks for your help?

regards

Bodo

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 1

댓글 달기

답변 4개

선택된 답변

Jech @jech

평판: 265

6

1

게시일: 2012년 7월 2일

옵션

Please, tell us exactly which model of MacBook Pro is it.

Yes, thank you.

I put a link to download ASD (apple service diagnostic)

ASD

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Thank You very much mistaro & machead3!!!

all tests are Passed,

...It feels better now

I have never heared about crashes that cause this trouble, but my collegues told me they had the same on windows pc when USB devices sometimes pluged in, the solution is allways the same they sayed: no battery & no power while pushing the powerknob to ensure all components are free of voltage, capacitores for example.

In 99% of all cases they had the computer starts normal and it was only a crash 1% leaves in mainboard failure due to a peak overvoltage.

so mr. machead3 you were right, but I had to remove the battery connector too, the Apple SMC reset with buttons did not work.

THANKS ALL, great knowledge here!

respect and cheers from cologne

Bodo

felusch 의 2012년 7월 2일

댓글 달기

Thank You very much mistaro & machead3!!!

all tests are Passed,

...It feels better now

I have never heared about crashes that cause this trouble, but my collegues told me they had the same on windows pc when USB devices sometimes pluged in, the solution is allways the same they sayed: no battery & no power while pushing the powerknob to ensure all components are free of voltage, capacitores for example.

In 99% of all cases they had the computer starts normal and it was only a crash 1% leaves in mainboard failure due to a peak overvoltage.

so mr. machead3 you were right, but I had to remove the battery connector too, the Apple SMC reset with buttons did not work.

THANKS ALL, great knowledge here!

respect and cheers from cologne

Bodo — felusch

originalmachead @originalmachead 평판: 116.3k 66 68 359 · Answer 1 · 2012-07-01T18:25:36-07:00

가장 유용한 답변

originalmachead @originalmachead

평판: 116.3k

66

68

359

게시일: 2012년 7월 1일

옵션

If this is still under warranty I'd take it to a Genius bar. There are so many things it could be... If it's out of warranty and you're willing to DIY you could follow the guide to open it. Remove the battery overnight (8hrs) and see if it boots powered only by the magsafe (don't screw it back together - just reassemble on a flat safe surface before applying power- you'll want to put the battery back eventually). If it boots gracefully shut down, remove the magsafe and reconnect the battery... see if that boots.

If this Answer is helpful please remember to return and mark it Accepted.

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 달기