옵션

Re: Hard Disk access. Putting back the top case

Hi, I just used your tutorial to get to my hard drive in my G4 PowerBook 15 inch Hi-Rez. the tutorial was very useful. I appreciate it being so easily accessible. Now, the problem is when I am PUTTING THEM BACK together. I am having difficulty matching up the position of the top case(incl Keyboard, etc)and especially putting some tabs on the Left side( side with interfaces/Power). I know if I rock the part up high i can get it to go in to the right hole then when i tilt it back down , it snapps out of the position. Any good tip on how to go about doing this in a bt more simple manner? please let me know It would help a bunch

Thanxx

Robert

답변되었습니다! 답변 보기 저도 같은 문제를 겪고 있습니다

좋은 질문 입니까?

예 아니요

점수 -1

댓글 달기

게시일: 2010년 2월 25일

옵션

I've put about 50 of these back together. Hold at 45 degree angle and put the end closest to the latch in first and slowly lower into position. watch as the sides go in. the top has a couple of tabs that have to be watched and may require a very little lateral pressure to get them in place and then snap shut. Just take your time and don't do it in bad light or when you're tired.

PowerBook G4 Aluminum 17" 1.67 GHz (High-Res)

해당 답변은 도움이 되었습니까?

예 아니요

점수 1

댓글 1개:

Outstanding +1 Ralph

rj713 의 2010년 2월 25일

댓글 달기

PowerBook G4 Aluminum 15" 1.67 GHz

Re: Hard Disk access. Putting back the top case

답변 1개

귀하의 답변을 추가하세요