DECK USER MANUAL

CONGRATULATIONS. YOU'RE ENTERING A NEW WORLD OF SOUND.

PREPARE TO:
Experience music like you've never heard or felt before.
Play the mix you want or swap out D. duties with up to four friends.
Choose indoor or outdoor EQ for sound sculpted to your location.
Make and take crystal clear calls on your DECK Bluetooth speaker.

OVERVIEW

THE GOODS.....4
POWER.....6
CONNECT.....8
SINGLE USER MODE.....10
HEIST MODE™.....12
ADVANCED.....14
TROUBLE.....15
SAFETY, REGULATORY & LEGAL.....15

CAUTION

Before using this product, please read the safety, regulatory and legal information in the legal booklet.

STATUS LIGHT POWER BUTTON Press & hold to turn on or off. NFC READER LOCATION Touch device here to pair. VOLUME DOWN MICROPHONE MULTI-FUNCTION VOLUME UP BUTTON Press to play & pause music, answer & end calls, Outdoor Mode, Heist™ Lock.

POWER

First thing's first: give DECK a charge. Plug the small end of the USB into the micro USB port located on the side of DECK. Then plug the large end into the included AC adaptor and plug that into the wall outlet.

Your speaker needs power, so load it all the way before you use it. It is fully charged when the status light turns green.

NOTES

For optimum block-rocking power, always use the charger and cable included in this package.

Turn off the speaker when you're not using it.

CAUTION

This battery is designed to last the life of your device. So you don't need to take it out or mess with it. If you try to remove or replace your battery it will void your warranty and could cause injury and damage your device.

If you suspect battery trouble, see “Trouble” section.

CONNECT

Now let's get DECK and your device talking to each other.

There are two ways to pair it: the Bluetooth $ ^{\circledR} $ EASYPAIR $ ^{TM} $ Method and the NFC $ ^{TM} $ way. EASYPAIR $ ^{TM} $ works for everybody. NFC $ ^{TM} $ people — you know who you are.

EASYPAIR™ METHOD

凸

STEP 1

Turn on Bluetooth on your device.

NFC™

！

STEP 3

※

STEP 2

Go to the Bluetooth $ ^{®} $ menu on your device and select DECK. Enter 0000 if prompted. Turn on DECK and it will automatically go into pairing mode.

三

When the device and DECK are connected, you'll get a pairing complete tone.

STEP 4

NOTE

Device paired while in HEIST MODE $ ^{TM} $ will only pair for music play, if you wish to also use your device for phone calls, please pair in Single User Mode.

STEP 1

I