Digital HD Video Camera Recorder Operating Guide

SONY

4-479-707-11(1)

Digital HD Video Camera Recorder

Operating Guide

LITHIUM ION $ ^{™} $ MEMORY STICK $ ^{™} $

HDR-AS30 / AS30V

English

Owner's Record

The model and serial numbers are located inside the connector cover. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product.

Model No. HDR-AS

Serial No.

Read this first

This manual covers basic operations. For more detailed operations, refer to the Handbook (PDF) built into this camera, by doing the following.

① Insert a charged battery pack into the camera.

② Connect the camera to a computer with the micro USB cable (supplied).

③ Press the NEXT or PREV button to power on.

④ Display [Computer] → [PMHOME] → [HANDBOOK] on your computer, then install the Handbook (PDF).

Checking the bundled items

Camera (1)

Camera is set in the Waterproof Case. Open the cover of the case as illustrated below.

② ①

Micro USB cable (1)

Rechargeable battery pack (NP-BX1) (1)

Waterproof Case (1)

Attachment Buckle (1)

Flat Adhesive Mount (1)

Curved Adhesive Mount (1)

Handbook

Included in the internal memory of this camera.

Set of printed documentation

Parts and controls

1 REC/access lamp

2 REC (Movie/Photo) button/

ENTER (Menu execute) button

3 ◄REC HOLD switch

4 N (N mark)

NFC: Near Field Communication

5 Display panel

6 Speaker

7 PREV button

8 NEXT button

9 Microphones

10 Lens

11 GPS sensor (HDR-AS30V only)

12 Connector cover

13 (Mic) jack

14 Expansion connector

15 CHG (Charge) lamp

16 HDMI OUT jack

17 Multi/Micro USB Terminal

Supports Micro USB compatible devices.

18 Battery pack/memory card cover

19 Memory card insertion slot

20 Battery ejection lever

21 Battery insertion slot

4479707110

1 2 3

4 5 6 7 8

12 | 21 13 | 20 14 | 19 15 | 18 16 | 17

Getting Started

Charging the battery pack

② ①

Open the cover.

Insert the battery pack.

Slide the battery ejection lever.

To close the cover, perform the operations in step 1 in opposite order.

Confirm that the camera is turned off.

To turn off the camera, press the NEXT button several times to display [PwOFF], then press the ENTER button.

Connect the Multi/Micro USB Terminal of the camera to a computer with the micro USB cable (supplied).