Studio Setup Guide

studio SETUP GUIDE

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your computer.

△CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

March 2010

Contents

Setting Up Your Studio Laptop .....5
Before Setting Up Your Computer .....5
Connect the AC Adapter .....6
Connect the Network Cable (Optional) .....7
Press the Power Button .....8
Set Up Microsoft Windows .....9
Create System Recovery Media (Recommended) .....10
Install the SIM Card (Optional) .....12
Enable or Disable Wireless (Optional) .....14
Connect to the Internet (Optional) .....16
Using Your Studio Laptop .....20
Right Side Features .....20
Left Side Features .....24
Computer Base and Keyboard Features .....28
Touch Pad Gestures .....30

Multimedia Controls ..... 32
Display Features ..... 34
Using the Touch Screen (Optional) ..... 36
Removing and Replacing the Battery ..... 40
Software Features ..... 42
Dell DataSafe Online Backup ..... 43
Dell Dock ..... 44
Free Fall Sensor ..... 45
Solving Problems ..... 46
Touch Screen Problems ..... 46
Touch Screen Calibration ..... 47
Beep Codes ..... 48
Network Problems ..... 49
Power Problems ..... 50
Memory Problems ..... 52
Lockups and Software Problems ..... 52

Contents

Using Support Tools.....55
Dell Support Center.....55
My Dell Downloads.....56
System Messages.....56
Hardware Troubleshooter.....58
Dell Diagnostics.....59
Restoring Your Operating System .....63
System Restore.....64
Dell DataSafe Local Backup.....65
System Recovery Media.....67
Dell Factory Image Restore.....68
Getting Help .....71
Technical Support and Customer Service.....72
DellConnect.....72
Online Services.....73
Automated Order-Status Service.....74
Product Information.....74

Returning Items for Repair Under
Warranty or for Credit.....75
Before You Call.....76
Contacting Dell.....77
Finding More Information and
Resources.....78
Specifications.....80
Appendix.....93
Macrovision Product Notice.....93
Information for NOM, or Official Mexican
Standard (Only for Mexico).....94
Index.....95

Setting Up Your Studio Laptop

This section provides information about setting up your Studio 1745/1747/1749 laptop.

Before Setting Up Your Computer

When positioning your computer, ensure that you allow easy access to a power source, adequate ventilation, and a level surface to place your computer.

Restricting airflow around your laptop may cause it to overheat. To prevent overheating

ensure that you leave at least 10.2 cm (4 inches)

at the back of the computer and a minimum of

5.1 cm (2 inches) on all other sides. You should

never place your computer in an enclosed

space, such as a cabinet or drawer when it is

powered on.

WARNING: Do not block, push objects

into, or allow dust to accumulate in

the air vents. Do not place your Dell™

computer in a low-airflow environment,

such as a closed briefcase, or on fabric

surfaces, such as carpets or rugs, while

it is powered on. Restricting the airflow

can damage the computer, deteriorate the

computer performance, or cause a fire.

The computer turns on the fan when the

computer gets hot. Fan noise is normal and

does not indicate a problem with the fan or

the computer.

CAUTION: Placing or stacking heavy or sharp objects on the computer may result in permanent damage to the computer.

Connect the AC Adapter

Connect the AC adapter to the computer and then plug it into a wall outlet or surge protector.

WARNING: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an incompatible cable or improperly connecting the cable to a power strip or electrical outlet may cause fire or permanent damage to your computer.

U

NOTE: Connect the power cord to the adapter firmly and ensure that the light on the adapter is on when you turn on power.

Connect the Network Cable (Optional)

To use a wired network connection, connect the network cable.