Nighthawk AC1750 Smart WiFi Router Model R6700 Installation Guide
Trademarks
NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Compliance
For the current EU Declaration of Conformity, visit http://support.netgear.com/app/answers/detail/a_id/11621/.
For regulatory compliance information, visit http://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Installation
Nighthawk
AC1750 Smart WiFi Router
Model R6700
Package Contents
The box contains the following items.
NETGEAR, Inc.
350 East Plumeria Drive
San Jose, CA 95134 USA
AC1750 Smart WiFi Route Antennas (3)
🌙
1
2
In some regions, a resource CD is included in the package.
- Remove the antenna caps.
Remove the antenna caps from the antenna posts on the router.
- Attach the antennas.
Attach the antennas on the threaded antenna posts.
Position the antennas for the best WiFi performance.
NETGEAR recommends that the center antenna be vertical and that you aim the others outward at 45-degree angles as shown.
- Prepare your modem.
Unplug your modem's power. If it has a battery backup, remove the battery.
4. Connect your modem
Antenna posts
Plug in your modem. Put the battery back in. Then cable the modem to the yellow Internet port on the router.
- Power on the router.
The Power LED lights amber and then turns white when the router is ready.
Ethernet cable e battery back o the yellow Internet DSL or cable Modem Router Ethernet cable Power adapter
6. Connect a computer
You can use an Ethernet cable or connect with WiFi.
To connect with WiFi, use the WiFi network name and password on the product label.
7. Log in to the router
Launch a web browser. NETGEAR genie displays.
If you do not see genie, enter
www.routerlogin.net in the address
field of the web browser. When prompted,
enter admin for the user name and
password for the password.
Follow the genie steps to connect to the Internet.
8. Get the genie app
Download the free genie app from www.NETGEAR.com/genie.
Easily share media, files, and printers on the network from your smartphone, tablet, or laptop.
9. Get the user manual
Support
You can get the user manual online at http://downloadcenter.netgear.com or through a link in the product's user interface.
Thank you for purchasing this NETGEAR product.
After installing your device, locate the serial number on the label of your product and use it to register your product at https://my.netgear.com.
You must register your product before
