ViewSonic $ ^{\textregistered} $

VG730m

LCD Display

• User Guide

• Guide de l'utilisateur

• Bedienungsanleitung

• Guía del usuario

• Guida dell'utente

• Guia do usuário

• Användarhandbok

Käyttöopas

• Podręcznik użytkownika

• Használati útmutató

• Руководство пользователя

• Uzivatelská píruka

• Kullanıcı kılavuzu

• 使用手册

• 使用手册

-사용자 안내서

ユーザーガイド

دليل المستخدم

Model No. : VS11383

Contents

TCO Information ..... i
Compliance Information ..... 1
Important Safety Instructions ..... 2
Declaration of RoHS Compliance ..... 3
Copyright Information ..... 4
Product Registration ..... 4
Getting Started
Package Contents ..... 5
Precautions ..... 5
Quick Installation ..... 6
Wall Mounting (Optional) ..... 7
To Raise and Lower the display ..... 7
Using the LCD Display
Setting the Timing Mode ..... 8
OSD and Power Lock Settings ..... 8
Adjusting the Screen Image ..... 9
Main Menu Controls ..... 11
Other Information
Specifications ..... 15
Troubleshooting ..... 16
Customer Support ..... 17
Cleaning the LCD Display ..... 18
Limited Warranty ..... 19

TCO Information

TCO Development

TCODevelopment TCO'03 DISPLAYS www.tcodevelopment.com

Congratulations!

The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

Some of the features of the TCO'03 Display requirements:

Ergonomics

Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time - beneficial both for the user and the environment

• Electrical safety

Emissions

• Electromagnetic fields

• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14000

• Restrictions on

a. chlorinated and brominated flame retardants and polymers

b. heavy metals such as cadmium, mercury and lead.

The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and IT-manufacturers all over the world.

For more information, please visit www.tcodevelopment.com

Compliance Information

For U.S.A.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Warning

To assure continued FCC compliance, the user must use grounded power supply cord and the cables which are included with the equipment or specified. Also, any unauthorized changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this device.

For Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

For European Countries

CE Conformity

C∈

The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”

User Information for all Countries

Notice: Use the cables which are included with the unit or specified.

Following information is only for EU-member states:

The mark shown to the right is in compliance with the Waste Electrical