주요 콘텐츠로 건너뛰기

이 문서에서 해답을 찾아보세요

여러분이 직접 읽을 필요 없도록, 저희는 ‘ 14’ 의 모든 페이지를 이미 읽어보았습니다. 지금 바로 질문하고 답변을 받아보세요.

Bambu Lab A1 User Guide

User guide 14 페이지 · 2.49 MB · PDF

Network Setting

Image

Network Select Wi-Fi Connect to Network This step could enable you to send printing from phone, computer. Skip →

① Follow the instructions until you see this screen. Press “Select Wifi” to search for available network.

Image

< Wi-Fi Passcode OK ABC Z X C V b n m 12@

③ Input the passcode, and then press "OK".

Image

< Select Wi-Fi (only for 2.4G) Wi-Fi SSID 1 Wi-Fi SSID 2 Wi-Fi SSID 3 Wi-Fi SSID 4

② Select your preferred network.

Printer Binding

① Download the Bambu Handy App. Register and log in to your Bambu Lab account.

③ Follow the instructions on the screen to complete the initial calibration. It is normal to have vibration and noise during the calibration process.

② Use Bambu Handy to scan the QR code on the screen, and bind your printer to your Bambu Lab account.

Image

Download Bambu Handy < Login the account Use Bambu Handy App to scan and log in This step could enable you to send printing from phone, computer and Makerworld!

Image

Bambu Lab

Recommended for beginners Bambu Lab X1 Series

9:41

No Device

Scanning Printers

9:41

Add Printer

Name Your Printer A1 (3dp-111-111)

Would you like to bind the Printer Bamboo Lab A1 with current account?

Bambou Lab A1 Bambu Lab

A1 (3dp-111-111)

Name Your Printer A1 (3dp-111-111)

Bambu Lab

A

Image

Bambu Lab

① Orient spool installation according to the filament winding direction. (as shown in the diagram)

$ ^{*} $Warning

① The AMS lite supports spools with a width of 40-68 mm and an inner diameter of 53-58 mm.

② Avoid using AMS lite to print flexible materials, including TPU, TPE, or absorbent PVA. Avoid using materials that are too hard (too high modulus) or too brittle (not enough toughness), including third-party fiber reinforcement materials (PA-CF/GF, PET-CF/GF, PLA-CF/GF, etc.). Please use external spool placement to print these filament.

Image

40-68 mm

Image

Bambu Lab 53-58 mm

Note: Press the release button to disengage drive motor if filament stuck.

iFixit에 무료로 가입하여 전체 가이드를 읽어보세요 (14 페이지)

봇을 차단하고 iFixit을 인간 사용자를 위해 유지하기 위해 무료 계정 등록이 필요합니다.

조회 통계:

지난 24시간: 0

지난 7일: 19

지난 30일: 19

전체 시간: 19