Table of contents

Table of Contents ..... 1
Usage Notice ..... 2
Safety Information ..... 2
Precautions ..... 3
Eye Safety Warnings ..... 5
Introduction ..... 6
Package Overview ..... 6
Product Overview ..... 7
Main Unit ..... 7
Control Panel ..... 8
Input / Output Connections ..... 9
Remote Control ..... 10
Installation ..... 11
Connecting the Projector ..... 11
Connect to Computer/Notebook ..... 11
Connect to Video Sources ..... 12
Powering On/Off the Projector ..... 13
Powering On the Projector ..... 13
Powering Off the projector ..... 14
Warning Indicator ..... 14
Adjusting the Projected Image ..... 15
Adjusting the Projector's Height ..... 15
Adjusting the Projector's Zoom / Focus ..... 16
Adjusting Projected Image Size ..... 16
User Controls ..... 17
Control Panel & Remote Control ..... 17
Control Panel ..... 17
Remote Control ..... 18
On-screen Display Menus ..... 20
How to operate ..... 20
Menu Tree ..... 21
IMAGE ..... 24
DISPLAY ..... 26
SYSTEM ..... 30
SETUP ..... 34
Appendices ..... 38
Troubleshooting ..... 38
Image Problems ..... 38
Other Problems ..... 39
Projector Status Indication ..... 40
Remote Control Problems ..... 41
Replacing the Lamp ..... 42
Compatibility Modes ..... 44
Ceiling Mount Installation ..... 46
Optoma Global Offices ..... 47
Regulation & Safety notices ..... 49

Usage Notice

Safety Information

△

The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

△！

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow.

2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specified by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):

☐ Unit has been dropped.

☐ Power supply cord or plug has been damaged.

Liquid has been spilled on to the projector.

☐ Projector has been exposed to rain or moisture.

Something has fallen in the projector or something is loose inside. Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Please call Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

(

Usage Notice

Precautions

!

Please follow all warnings, precautions and maintenance as recommended in this user's guide.

War