Ⅵ . SERVICE INFORMATION

■ Disassembling the Camera

1. Remove the 2 screws.
2. Remove the 2 screws.
3. Remove the 2 screws.

Ⅵ . SERVICE INFORMATION

6. Separate the Belt Pin.
7. Separate the Top Cover.
8. Remove the 2 screws.

Ⅵ . SERVICE INFORMATION

11. Remove the 2 screws.
12. 1> Disconnect the Barrel Assy. PCB from the connector and remove the three screws on the CCD Assy.
13. 2> Remove the two screws on the main PCB Assy.
14. 3> Remove the soldering on connector 2 of the battery armature.
15. Separate the LCD Assy plate.

15. Remove the 2 screws.

Ⅵ . SERVICE INFORMATION

17. Remove the screw.

18. Separate the barrel Assy.