이 문서에서 해답을 찾아보세요
여러분이 직접 읽을 필요 없도록, 저희는 ‘ 38’ 의 모든 페이지를 이미 읽어보았습니다. 지금 바로 질문하고 답변을 받아보세요.
Arduino Mega 2560 Datasheet
RobotShop www.robotshop.com La robotique à votre service! - Robotics at your service!
∞+ ARDUINO
ARDUINO
Arduino Mega 2560 Datasheet
TX
lonelybinary.com RobotShop www.robotshop.com La robotique à votre service! - Robotics at your service!
ROARD MODEL MEGA 2560 OPEN-SOURCE ELECTRONICS PROTOTIPPING PLATFORM WWW.ARDUIXO.CC MADE IN ITALY ROHS COMPLIANT ZERO CARBON FOOTPRINT IMPATTO ZERO®
Overview
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started. The Mega is compatible with most shields designed for the Arduino Duemilanove or Diecimila.
Schematic & Reference Design
EAGLE files: arduino-mega2560-reference-design.zip
RobotSlop
RobotShop www.robotshop.com La robotique à votre service! - Robotics at your service!
www.robotshop.com
La robotique à votre service! - Robotics at your service!
Schematic: $ \underline{\text{arduino-mega2560-schematic.pdf}} $
Summary
| Microcontroller | ATmega2560 |
| Operating Voltage | 5V |
| Input Voltage (recommended) | 7-12V |
| Input Voltage (limits) | 6-20V |
| Digital I/O Pins | 54 (of which 14 provide PWM output) |
| Analog Input Pins | 16 |
| DC Current per I/O Pin | 40 mA |
| DC Current for 3.3V Pin | 50 mA |
| Flash Memory | 256 KB of which 8 KB used by bootloader |
| SRAM | 8 KB |
| EEPROM | 4 KB |
| Clock Speed | 16 MHz |
Power
The Arduino Mega can be powered via the USB connection or with an external power supply. The power source is selected automatically.
External (non-USB) power can come either from an AC-to-DC adapter (wall-wart) or battery. The adapter can be connected by plugging a 2.1mm center-positive plug into the board's power jack. Leads from a battery can be inserted in the Gnd and Vin pin headers of the POWER connector.
The board can operate on an external supply of 6 to 20 volts. If supplied with less than 7V, however, the 5V pin may supply less than five volts and the board may be unstable. If using more than 12V, the voltage regulator may overheat and damage the board. The recommended range is 7 to 12 volts.
The Mega2560 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter.
lonelybinary.com RobotShop www.robotshop.com La robotique à votre
