필요한 것
-
-
You don't need to use screwdrivers, flat edges or any TOOL to open the back panel. Just pull downward and up firmly and the outer most surface will lift up.
-
Firmly place your fingers along the recessed edge, and pull down while lifting upwards.
-
At this point you can easily pull the panel away. No screw drivers, no spudgers, no 'clips' broken.
-
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
팀
