주요 콘텐츠로 건너뛰기

소개

Replacing the trigger button requires the removal of the controller back plate and the careful pulling of the trigger from its housing.

부품

지정된 부품이 없습니다.

  1. Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller. Lift up and remove the controller back plate.
    • Lay the controller face down on a flat surface and remove the seven 9mm Phillips #0 screws on the back of the controller.

    • Lift up and remove the controller back plate.

  2. With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing  to remove it. With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing  to remove it.
    • With one hand, hold the controller down and with the other pull up on the lower clear plastic trigger housing to remove it.

  3. Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing. Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing.
    • Firmly grip the clear plastic trigger housing with one hand and use your other hand pull the black trigger button from its housing.

결론

To reassemble your device, follow these instructions in reverse order.

Aj Coello

회원 가입일: 2017년 02월 17일

675 평판

안내서 6개 작성하였습니다

USF Tampa, Team S19-G5, Hoffman Spring 2017 USF Tampa, Team S19-G5, Hoffman Spring 2017 회원

USFT-HOFFMAN-S17S19G5

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 14

전체 시간: 782