기기를 수리하세요 커뮤니티 상점

Amazon Echo Tweeter Assembly Replacement

소개

This guide demonstrates how to replace the tweeter assembly in the Amazon Echo. Removing the assembly is a prerequisite for replacing the tweeter or woofer.

필요한 것

  1. Amazon Echo Tweeter Assembly Replacement, Power and Speaker Driver Board: 1 단계, 이미지 1/1

    • Power off and unplug your Echo before disassembly. Failure to do so could result in injury or damage to the device.

    • Peel off the rubber footing from the bottom of the Echo.

    • Do not pull the rubber footing too hard, as it could stretch out of shape. Use a spudger to help remove the foot if you have any trouble.

    편집

  2. Amazon Echo Tweeter Assembly Replacement: 2 단계, 이미지 1/3 Amazon Echo Tweeter Assembly Replacement: 2 단계, 이미지 2/3 Amazon Echo Tweeter Assembly Replacement: 2 단계, 이미지 3/3

    • Remove the four 42.8 mm T10 Torx screws from the bottom of the Echo.

    편집

  3. Amazon Echo Tweeter Assembly Replacement: 3 단계, 이미지 1/1

    • Slowly lift the plate containing the board. Be careful not to disconnect any of the wires.

    편집

  5. Amazon Echo Tweeter Assembly Replacement: 4 단계, 이미지 1/1

    • Using tweezers, carefully disconnect the two red and black cables from their sockets on the board.

    • Tugging on the wires may damage the device. Pull from the plastic connectors instead.

    편집

  6. Amazon Echo Tweeter Assembly Replacement: 5 단계, 이미지 1/2 Amazon Echo Tweeter Assembly Replacement: 5 단계, 이미지 2/2

    • Lift the brown plastic latch on the ZIF connector securing the driver board ribbon cable.

    • Pull the ribbon cable from its connector. The plate and board should now be free from the Echo.

    편집

  7. Amazon Echo Tweeter Assembly Replacement: 6 단계, 이미지 1/3 Amazon Echo Tweeter Assembly Replacement: 6 단계, 이미지 2/3 Amazon Echo Tweeter Assembly Replacement: 6 단계, 이미지 3/3

    • Using the spudger, pull back the two plastic clips on the plate.

    • Lift the board up and pull it away from the plate.

    편집

  8. Amazon Echo Tweeter Assembly Replacement, Tweeter Assembly: 7 단계, 이미지 1/2 Amazon Echo Tweeter Assembly Replacement, Tweeter Assembly: 7 단계, 이미지 2/2

    • Remove the plastic plate from the bottom of the device. Then remove the plastic shrouding.

    편집

  9. Amazon Echo Tweeter Assembly Replacement: 8 단계, 이미지 1/1

    • Peel off the black fabric wrapped around the Echo.

    • Be careful not to rip the fabric. Use a spudger to help remove the adhesive if you have any trouble.

    편집

  10. Amazon Echo Tweeter Assembly Replacement: 9 단계, 이미지 1/3 Amazon Echo Tweeter Assembly Replacement: 9 단계, 이미지 2/3 Amazon Echo Tweeter Assembly Replacement: 9 단계, 이미지 3/3

    • Remove the four 42.8 mm T10 Torx screws around the tweeter.

    • Lift the tweeter and its attached housing from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Alexander Albert

회원 가입일: 02/04/16

1,145 평판

안내서 6개 작성하였습니다

배지: 13

배지 +10개 더

팀

USF Tampa, Team 3-3, Wollert Spring 2016 USF Tampa, Team 3-3, Wollert Spring 2016 회원

USFT-WOLLERT-S16S3G3

4 회원들

안내서 12개 작성하였습니다

댓글 3개

I've gotten this far, but where do you get a replacement? No brand or model # on tweeter.

Kyle - 답글

Are you saying removing it and replacing the same tweeter is what you have to do? It says no parts.

kathy1557 - 답글

The primary purpose of this guide is to show you how to remove a failing tweeter so that you can replace it with a new one. The "no parts required" text appears at the top of this guide because the author didn't have a source for the replacement part.

Ron Davis -

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 5

전체 시간: 3,672