주요 콘텐츠로 건너뛰기

소개

The Astro A20 microphone replacement guide shows the steps of replacing a microphone with the use of a 60 mm extension, Phillips #1 screwdriver, and a new microphone.

부품

지정된 부품이 없습니다.

  1. Place one hand on the hard side of the headset ear portion and on the cushion.
    • Place one hand on the hard side of the headset ear portion and on the cushion.

    • Lift the small portion on the edge of the cushion.

  2. Slide the metal spudger underneath the lift part of the ear cushion.
    • Slide the metal spudger underneath the lift part of the ear cushion.

    • Pull the ear cushion while wedging the spudge around the edge of the ear cushion.

  3. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  4. Remove the ear cushion from the headset. Remove the ear cushion from the headset.
    • Remove the ear cushion from the headset.

  5. Place one hand on the back of the speaker.
    • Place one hand on the back of the speaker.

  6. Remove the four 7mm screws with a Phillips #1 screwdriver. You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.
    • Remove the four 7mm screws with a Phillips #1 screwdriver.

    • You may want to use a 60mm screwdriver extension to reach the screws inside of the headset.

  7. Lift the speaker area. Disconnect the wires that connect the microphone shown by the blue square.
    • Lift the speaker area.

    • Disconnect the wires that connect the microphone shown by the blue square.

    • Remove the 7mm screw with a Phillips #1 screwdriver.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Jasmine Yarbrough

회원 가입일: 2018년 09월 10일

627 평판

안내서 5개 작성하였습니다

University of Alabama, Team S1-G2, Bedsole Fall 2018 University of Alabama, Team S1-G2, Bedsole Fall 2018 회원

UA-BEDSOLE-F18S1G2

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 7

지난 7일: 19

지난 30일: 105

전체 시간: 678