기기를 수리하세요 커뮤니티 상점

Astro Mixamp Control Button Replacement

소개

Use this guide to remove control buttons for cleaning or replacement.

필요한 것

  1. Astro Mixamp Control Button Replacement, Panel Dial: 1 단계, 이미지 1/2 Astro Mixamp Control Button Replacement, Panel Dial: 1 단계, 이미지 2/2

    • Grip the dial tightly and pull straight off the device.

    • Repeat for the second dial

    번역하기

  2. Astro Mixamp Control Button Replacement: 2 단계, 이미지 1/2 Astro Mixamp Control Button Replacement: 2 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Using tweezers, remove the spacer nuts and washers from each dial post.

    번역하기

  3. Astro Mixamp Control Button Replacement, Outer Casing: 3 단계, 이미지 1/2 Astro Mixamp Control Button Replacement, Outer Casing: 3 단계, 이미지 2/2

    • Before opening your device, ensure the device is not on or connected to the charging cable.

    • Insert a plastic opening tool into the seam between the rubber foot and plastic casing.

    • Pull the rubber foot free of the plastic casing.

    번역하기

  5. Astro Mixamp Control Button Replacement: 4 단계, 이미지 1/1

    • Use a screwdriver to remove the screw from the rear casing.

    번역하기

  6. Astro Mixamp Control Button Replacement: 5 단계, 이미지 1/1

    • Gently lift the rear casing from the device.

    번역하기

  7. Astro Mixamp Control Button Replacement, Motherboard: 6 단계, 이미지 1/3 Astro Mixamp Control Button Replacement, Motherboard: 6 단계, 이미지 2/3 Astro Mixamp Control Button Replacement, Motherboard: 6 단계, 이미지 3/3

    • Remove the four screws that hold the motherboard in place.

    • Only touch the edges of the motherboard. Touching the surface can damage the motherboard.

    번역하기

  8. Astro Mixamp Control Button Replacement: 7 단계, 이미지 1/1

    • Gently pull the motherboard from the front cover.

    번역하기

  9. Astro Mixamp Control Button Replacement, Control Button: 8 단계, 이미지 1/2 Astro Mixamp Control Button Replacement, Control Button: 8 단계, 이미지 2/2

    • Gently insert a metal spudger under a control button housing.

    • Do not pry the button housing from the front panel, this can cause damage to the button.

    • Rotate the control button around the marked pin.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Hope Burns

회원 가입일: 10/29/16

741 평판

안내서 5개 작성하였습니다

배지: 9

배지 +6개 더

팀

IUPUI, Team 3-3, Wilson Fall 2016 IUPUI, Team 3-3, Wilson Fall 2016 회원

IUPUI-WILSON-F16S3G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 9

30일 전: 16

전체 시간: 1,592