소개
If the dial is stuck in any particular position it will be necessary to replace. This guide will show how to locate and replace the dial.
필요한 것
-
-
Unscrew the two 9mm screws on the back panel using a #0 Phillips screwdriver.
-
-
-
Remove the back panel of the device by lifting upward.
-
Remove the battery from the meter before continuing.
-
-
-
-
Carefully remove dial from device by lifting upward.
-
Clean existing dial or replace if necessary.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.