기기를 수리하세요 커뮤니티 상점

Connect Four Electronic Handheld Back Casing Replacement

소개

To access any of the internal components of the Connect Four Electronic Handheld, you will need to remove the back casing.

필요한 것

  1. Connect Four Electronic Handheld Back Casing Replacement, Ensure the device is off.: 1 단계, 이미지 1/1

    • Make sure the Connect Four Electronic Handheld is off by allowing it to shut off automatically.

    편집

  3. Connect Four Electronic Handheld Back Casing Replacement, Removing the battery casing.: 2 단계, 이미지 1/2 Connect Four Electronic Handheld Back Casing Replacement, Removing the battery casing.: 2 단계, 이미지 2/2

    • Using a Phillips head screwdriver, remove the (9.1mm length) #2 screw in the middle of the battery casing.

    • Slide the cover off and remove the battery.

    편집

  4. Connect Four Electronic Handheld Back Casing Replacement, Removing/Replacing the Back Casing: 3 단계, 이미지 1/2 Connect Four Electronic Handheld Back Casing Replacement, Removing/Replacing the Back Casing: 3 단계, 이미지 2/2

    • Using a Phillips head screwdriver, remove the four (7.1mm- length) #3 screws that hold the back casing in place.

    • Carefully remove the back casing.

    • When removing the back casing, make sure not to rupture the wires that connect the speaker to the circuit board.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Wil

회원 가입일: 10/22/14

313 평판

안내서 3개 작성하였습니다

배지: 10

배지 +7개 더

팀

Baylor, Team 8-11, Williams Fall 2014 Baylor, Team 8-11, Williams Fall 2014 회원

BU-WILLIAMS-F14S8G11

3 회원들

안내서 12개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 112