Turn the calculator over so the blue Texas Instruments logo is facing you.
  • Turn the calculator over so the blue Texas Instruments logo is facing you.

  • Slide the blue cover downwards until it is completely removed from the calculator.

댓글 쓰기

If the keypad is not already connected, skip the next 2 steps.
  • If the keypad is not already connected, skip the next 2 steps.

  • Turn the calculator over so the keypad is facing down.

  • Locate the sliding latch towards the bottom of the calculator.

댓글 쓰기

  • Slide the latch to the right to release the keypad.

  • At the same time, pull the keypad downwards.

댓글 쓰기

  • Take note of where the keypad and the calculator connect.

댓글 쓰기

  • Slide the keypad directly into where it connects to the calculator until you hear a click. Readjust as necessary.

댓글 쓰기

  • Press the "ON" button to make sure that the calculator turns on. If the calculator turns on correctly, you have properly inserted the keypad.

댓글 쓰기

결론

If the keypad was inserted properly, the calculator should turn on without any errors.

Mariel Sanchez

회원 가입일: 2012년 09월 27일

1 평판

안내서 2개 작성하였습니다

Cal Poly, Team 7-52, Forte Fall 2012 Cal Poly, Team 7-52, Forte Fall 2012 회원

CPSU-FORTE-F12S7G52

5 회원들

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 64

지난 30일: 264

전체 시간: 9,001