소개
Hi everyone, In this guide, I'll show you how to disassemble to replace the main parts of the DJI Mini 3 Pro drone.
Additional Information
After replacing the drone's GPS module, you will need to calibrate the drone in the DJI Fly mobile app.
To replace the ESC board and drone arms, you will need a soldering iron.
After replacing the motherboard, you will need to calibrate the gimbal camera.
Use this manual to calibrate the gimbal camera https://youtu.be/mu03HWXplM4
필요한 것
동영상 지침
To reassemble your device, follow these instructions.
To reassemble your device, follow these instructions.
다른 5명이 해당 안내서를 완성하였습니다.
댓글 0개