소개

Use this guide to remove the back panel to access the components inside.

부품

부품은 필요하지 않습니다.

The battery is located on the bottom of the camera.
  • The battery is located on the bottom of the camera.

  • Remove the battery by placing your thumb on the buttom flap and sliding the release button away from the side the lens is on. (The screwdriver is simply used as a reference point, no screws need to be removed)

  • Charge the battery for 60-90 minutes if your battery is dead.

  • When installing a charged battery, align the battery appropriately, with the positive signs and negative signs lining up.

댓글 쓰기

Unscrew the 3mm long cover screws at the corners of the camera using a #00 Philips Screwdriver.
  • Unscrew the 3mm long cover screws at the corners of the camera using a #00 Philips Screwdriver.

  • Unscrew the 2mm long screws securing the sides of the camera which holds the back panel. Use the same screwdriver.

댓글 쓰기

  • Be careful when removing the back cover, you will need to detach the connecting ribbons

  • Detach the ribbons using your thumb, sliding them out of their slots.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Bobby Hodges

회원 가입일: 2010년 04월 18일

49 평판

안내서 6개 작성하였습니다

Cal Poly, Team 33-71, Johann Spring 2010 Cal Poly, Team 33-71, Johann Spring 2010 회원

CPSU-JOHANN-S10S33G71

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 4,001