주요 콘텐츠로 건너뛰기

Disassembling Optoma HD20 Cover

필요한 것

  1. Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: 1 단계, 이미지 1/2 Disassembling Optoma HD20 Cover, Disassembling Optoma HD20 Cover: 1 단계, 이미지 2/2
    • Twist the focal cap clockwise until it is fully extended.

    • Remove the focal cap by pulling it straight out.

  2. Disassembling Optoma HD20 Cover: 2 단계, 이미지 1/1
    • Use a Phillips #1 screwdriver to remove the three 7.5mm screws on the bottom of the device.

  3. Disassembling Optoma HD20 Cover: 3 단계, 이미지 1/1
    • Use a plastic opening tool to gently pry the top cover off of the device.

    • It is easier to pry off the cover from the back side just above the HDMI ports.

  4. Disassembling Optoma HD20 Cover: 4 단계, 이미지 1/1
    • When removing the cover, be cautious of the ribbon connecting the top buttons to the main circuit board. The ribbon must be disconnected before proceeding.

    • Remove the ribbon by disconnecting it from the main circuit board.

    • Lift up the clip holding it down and pull the ribbon out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Trever

회원 가입일: 01/22/15

1,264 평판

안내서 6개 작성하였습니다

Cal Poly, Team 21-23, Maness Winter 2015 Cal Poly, Team 21-23, Maness Winter 2015 회원

CPSU-MANESS-W15S21G23

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 8

30일 전: 18

전체 시간: 3,043