주요 콘텐츠로 건너뛰기

DualShock 3 Front Shell Cover Replacement

필요한 것

  1. DualShock 3 Front Shell Cover Replacement, Front Shell Cover.: 1 단계, 이미지 1/2 DualShock 3 Front Shell Cover Replacement, Front Shell Cover.: 1 단계, 이미지 2/2
    • Flip the controller over and locate the five 7.2mm Phillips #0 screws securing the rear cover to the front cover.

  2. DualShock 3 Front Shell Cover Replacement: 2 단계, 이미지 1/3 DualShock 3 Front Shell Cover Replacement: 2 단계, 이미지 2/3 DualShock 3 Front Shell Cover Replacement: 2 단계, 이미지 3/3
    • Using the Phillips #0 screwdriver, remove the five screws holding the rear/back cover in place.

  3. DualShock 3 Front Shell Cover Replacement: 3 단계, 이미지 1/2 DualShock 3 Front Shell Cover Replacement: 3 단계, 이미지 2/2
    • Gently lift the rear cover away from the rest of the controller starting from the bottom side adjacent to the analog stick controllers.

    • Push gently by sliding the rear back forward towards the top edge of the dual shock controller to prevent tripping the two bottom triggers labelled (2).

  4. DualShock 3 Front Shell Cover Replacement: 4 단계, 이미지 1/1
    • Lift the rear cover off of the controller to expose the interior.

  5. DualShock 3 Front Shell Cover Replacement: 5 단계, 이미지 1/3 DualShock 3 Front Shell Cover Replacement: 5 단계, 이미지 2/3 DualShock 3 Front Shell Cover Replacement: 5 단계, 이미지 3/3
    • Carefully detach or disconnect the lithium polymer battery from the motherboard.

    • The wires are fragile, be careful not to break them when pulling out the battery as they can break easily.

  6. DualShock 3 Front Shell Cover Replacement: 6 단계, 이미지 1/3 DualShock 3 Front Shell Cover Replacement: 6 단계, 이미지 2/3 DualShock 3 Front Shell Cover Replacement: 6 단계, 이미지 3/3
    • Use the Phillips #0 screwdriver to remove five 7.2 mm screws from the motherboard.

    • Lift the motherboard, vibration motors and analog module joysticks pads all in one connection, away from the shell.

  7. DualShock 3 Front Shell Cover Replacement: 7 단계, 이미지 1/2 DualShock 3 Front Shell Cover Replacement: 7 단계, 이미지 2/2
    • Carefully lift the rubber or plastic part holding the button triggers labelled (2) in place.

    • Be careful not to strip the plastic rubber holding the triggers in place.

    • Slide the trigger button retainers away from the front shell. Set them aside.

  8. DualShock 3 Front Shell Cover Replacement: 8 단계, 이미지 1/1
    • Set aside the colored buttons and lift the white rubber part holding the Dpad buttons in place to securely remove it.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Joseph Wambui

회원 가입일: 07/09/21

253 평판

안내서 1개 작성함

York University, Team 1-28, O'Regan Fall 2021 York University, Team 1-28, O'Regan Fall 2021 회원

YORK-O'REGAN-F21S1G28

1 회원

안내서 2개 작성하였습니다

댓글 2개

Personally I believe with the current price of a DualShock 3 controller its not even worth it to replace the following parts. Or maybe its just me? Sony has done a great product and will continue to do so!

Andrew McMason - 답글

The original 6 axis controller I got with my PS3 back in the day has different size screws than the gold plated one I got a few years later. They're about 3 mm longer too

Gregory Hedges - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 29

30일 전: 116

전체 시간: 3,201