물건을 수리하세요 커뮤니티 상점

Ematic Model FTABMP2 Camera Replacement

소개

This guide demonstrates how to replace the Ematic model FTABMP2 camera. If you dropped your camera or it's just getting old, you may need to replace the camera component to continue using your device.

No special skills are needed to complete these steps. When taking the Ematic apart, be careful while unplugging the components from the motherboard. Also, make sure to discharge yourself from static by touching metal or wearing an anti-static discharge strap to prevent any damage to electrical components.

Before you begin this repair, power off your tablet and unplug it from the charging adaptor.

필요한 것

  1. Ematic Model FTABMP2 Camera Replacement, Camera: 1 단계, 이미지 2개 중 1개 Ematic Model FTABMP2 Camera Replacement, Camera: 1 단계, 이미지 2개 중 2개

    • Use the opening tool to carefully pry open the case to reveal the motherboard underneath.

    편집

  3. Ematic Model FTABMP2 Camera Replacement: 2 단계, 이미지 2개 중 1개 Ematic Model FTABMP2 Camera Replacement: 2 단계, 이미지 2개 중 2개

    • Flip open the retaining flap on the LCD cable.

    • Remove the LCD from the rest of the tablet.

    • Be careful when disconnecting the LCD cable.

    편집

  4. Ematic Model FTABMP2 Camera Replacement: 3 단계, 이미지 2개 중 1개 Ematic Model FTABMP2 Camera Replacement: 3 단계, 이미지 2개 중 2개

    • Carefully unplug the camera from the motherboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

6다른 기여자 명과 함께

Timothy

회원 가입일: 01/21/15

505 평판

안내서 5개를 작성함

배지: 6

배지 +3개 더

팀

USF Tampa, Team 9-2, Brown Winter 2015 USF Tampa, Team 9-2, Brown Winter 2015 회원

USFT-BROWN-W15S9G2

5 회원들

안내서 10개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 4

지난 30일: 9

전체 시간: 260