물건을 수리하세요 커뮤니티 상점

Flash and re-install the firmware

소개

Guide on how to re-install the firmware, if it became corrupted and wheel is not powering on.

필요한 것

    • Download and install the drivers from here.

    번역하기

    • Press on the Windows button and type "Firmware Update" into the search.

    번역하기

    • Unplug T-GT from USB port.

    • Keep it plugged-in to power.

    번역하기

  5. Flash and re-install the firmware, Press and Hold L3 + R3: 4 단계, 이미지 1개 중 1개

    • Press and Hold L3 + R3 on the right side of the base.

    번역하기

  6. Flash and re-install the firmware, Connect to USB While holding the buttons: 5 단계, 이미지 1개 중 1개

    • Keep holding the L3 + R3 buttons and connect T-GT II to USB port

    • Once connected, wait a few seconds and let go of the buttons.

    • Switch on the left side of the base needs to be set to OTHER before connecting to USB.

    번역하기

    • Your T-GT II should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

    번역하기
결승점

작성자

2다른 기여자 명과 함께

Formica Fusca

회원 가입일: 08/01/24

2,595 평판

안내서 15개를 작성함

배지: 13

배지 +10개 더

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 3

지난 30일: 29

전체 시간: 394