주요 콘텐츠로 건너뛰기

Flip Video Ultra Power button Replacement

필요한 것

  1. Flip Video Ultra Power button Replacement, Power button: 1 단계, 이미지 1/1
    • Unlock the battery cover by sliding the switch to the unlock position.

  2. Flip Video Ultra Power button Replacement: 2 단계, 이미지 1/1
    • Remove the battery cover by sliding it down the camera.

  3. Flip Video Ultra Power button Replacement: 3 단계, 이미지 1/1
    • Remove the batteries

  4. Flip Video Ultra Power button Replacement: 4 단계, 이미지 1/1
    • Slide the black upper casing off from the device.

  5. Flip Video Ultra Power button Replacement: 5 단계, 이미지 1/2 Flip Video Ultra Power button Replacement: 5 단계, 이미지 2/2
    • Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.

  6. Flip Video Ultra Power button Replacement: 6 단계, 이미지 1/1
    • Remove the top casing from the bottom to reveal the inner circuit board.

  7. Flip Video Ultra Power button Replacement: 7 단계, 이미지 1/2 Flip Video Ultra Power button Replacement: 7 단계, 이미지 2/2
    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

  8. Flip Video Ultra Power button Replacement: 8 단계, 이미지 1/1
    • Gently separate the circuit board from the casing.

  9. Flip Video Ultra Power button Replacement: 9 단계, 이미지 1/2 Flip Video Ultra Power button Replacement: 9 단계, 이미지 2/2
    • Unscrew the single 1mm screw from USB housing unit.

  10. Flip Video Ultra Power button Replacement: 10 단계, 이미지 1/2 Flip Video Ultra Power button Replacement: 10 단계, 이미지 2/2
    • Unscrew the 2 1mm screws and gently separate camera wires from plastic casing.

  11. Flip Video Ultra Power button Replacement: 11 단계, 이미지 1/1
    • Gently pry out the USB housing unit with the Ifxit Opening Tool.

  12. Flip Video Ultra Power button Replacement: 12 단계, 이미지 1/3 Flip Video Ultra Power button Replacement: 12 단계, 이미지 2/3 Flip Video Ultra Power button Replacement: 12 단계, 이미지 3/3
    • Remove the two 1mm screws and separate the circuit board and camera from the plastic casing.

  13. Flip Video Ultra Power button Replacement: 13 단계, 이미지 1/1
    • Unscrew the camera housing unit from the plastic case.

결론

To reassemble your device, follow these instructions in reverse order.

Nathaniel Ruf

회원 가입일: 10/18/16

514 평판

안내서 5개 작성하였습니다

UMass Dartmouth, Team 5-7, Martin Fall 2016 UMass Dartmouth, Team 5-7, Martin Fall 2016 회원

UMASSD-MARTIN-F16S5G7

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 435