주요 콘텐츠로 건너뛰기

Function Key Motherboard

필요한 것

  1. Function Key Motherboard, Front and Back Covers: 1 단계, 이미지 1/3 Function Key Motherboard, Front and Back Covers: 1 단계, 이미지 2/3 Function Key Motherboard, Front and Back Covers: 1 단계, 이미지 3/3
    • Unscrew a total of 6 4.45 mm phillips head screws using a #00 phillips head screwdriver.

    • There are 2 screws on the left side (when looking at the front of the camera).

    • There are 3 screws on the bottom

    • There is 1 screw on the right side

  2. Function Key Motherboard: 2 단계, 이미지 1/1
    • Turn to the bottom of the camera.

    • Open the memory card cover by sliding the "CARD/BATT." button up, and then pulling the cover to the left.

  3. Function Key Motherboard: 3 단계, 이미지 1/1
    • This is what the SD card/battery compartment looks like when opened.

    • Remove one 4.45mm phillips head screw from the SD card/battery compartment using a #00 phillips head screwdriver.

  4. Function Key Motherboard: 4 단계, 이미지 1/2 Function Key Motherboard: 4 단계, 이미지 2/2
    • Gently remove the front cover away from the camera body.

    • Tip: Start by loosening the teeth on the left side of the camera next to the battery compartment.

  5. Function Key Motherboard: 5 단계, 이미지 1/1
    • The camera should look like this once the front cover is removed.

  6. Function Key Motherboard: 6 단계, 이미지 1/3 Function Key Motherboard: 6 단계, 이미지 2/3 Function Key Motherboard: 6 단계, 이미지 3/3
    • Start from the battery compartment and remove the back cover.

    • Caution: Do not tug on the back cover after it is removed. This could tear the ribbon attaching the back cover to the camera body.

    • Remove the connecting ribbon from the body of the camera using a pair of tweezers.

  7. Function Key Motherboard: 7 단계, 이미지 1/1
    • Once the ribbon connecting the back cover is removed, the back of the camera body should look like this.

  8. Function Key Motherboard, Function Key Motherboard: 8 단계, 이미지 1/3 Function Key Motherboard, Function Key Motherboard: 8 단계, 이미지 2/3 Function Key Motherboard, Function Key Motherboard: 8 단계, 이미지 3/3
    • Remove 2 4.35mm phillips head screws from around the LCD screen using a #00 phillips head screwdriver.

    • Caution: Do not tug on the LCD screen because this could tear the ribbon connecting the LCD screen to the body of the camera.

    • Loosen the black ribbon clamp using an iPod opening tool

    • Release the LCD screen by removing the ribbon from the body of the camera.

  9. Function Key Motherboard: 9 단계, 이미지 1/2 Function Key Motherboard: 9 단계, 이미지 2/2
    • Unscrew 2 3.35mm phillips head screw from the face of the function key motherboard using a #00 phillips head screwdriver.

    • Caution: Do not tug on the motherboard because this will tear the ribbon connecting the motherboard to the body of the camera.

  10. Function Key Motherboard: 10 단계, 이미지 1/3 Function Key Motherboard: 10 단계, 이미지 2/3 Function Key Motherboard: 10 단계, 이미지 3/3
    • Release the black ribbon clamp attached to the back of the motherboard using an iPod opening tool to lift the clamp.

    • Remove the ribbon connecting the function key motherboard from the body of the camera using tweezers.

    • The function key motherboard has the SD card reader attached to the back. The motherboard and SD card combination should be replaced.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Shaelyn Thomas

회원 가입일: 04/19/11

332 평판

안내서 4개 작성하였습니다

Cal Poly, Team 8-6, Regan Spring 2011 Cal Poly, Team 8-6, Regan Spring 2011 회원

CPSU-REGAN-S11S8G6

4 회원들

안내서 22개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 4

전체 시간: 3,168