소개

Use this guide to remove the battery cover and battery from the Game Boy.

부품

부품은 필요하지 않습니다.

Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad. Once the screw has been loosened, lift the cover off the back of the device. Once the screw has been loosened, lift the cover off the back of the device.
  • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

  • Once the screw has been loosened, lift the cover off the back of the device.

댓글 쓰기

Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector. Gently grab the wires. Gently grab the wires.
  • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

  • Gently grab the wires.

I heard of someone doing this and the connecter got stuck in the plug. Is there any other way to do it?

Lucas Hoekstra (Lucas9810) - 답글

Carefully pull the wires until the connector comes out of the device. Be careful! Don't pull too hard, or you may rip the wires out from the connector.
  • Carefully pull the wires until the connector comes out of the device.

  • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

  • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 5명이 해당 안내서를 완성하였습니다.

Jack

회원 가입일: 2010년 01월 21일

243 평판

안내서 9개 작성하였습니다

Cal Poly, Team 8-46, Regan Winter 2010 Cal Poly, Team 8-46, Regan Winter 2010 회원

CPSU-REGAN-W10S8G46

5 회원들

안내서 15개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 12

지난 30일: 51

전체 시간: 10,725