기기를 수리하세요 커뮤니티 상점

Garmin GPSmap 60CSx Keypad Buttons Replacement

소개

If the buttons are unresponsive or sticking, the keypad may be compromised and need to be replaced. This is a guide to replace the keypad buttons of the Garmin GPSmap 60CSx.

필요한 것

  1. Garmin GPSmap 60CSx Keypad Buttons Replacement, Back Cover and AA Batteries: 1 단계, 이미지 1/1

    • Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.

    편집

  2. Garmin GPSmap 60CSx Keypad Buttons Replacement: 2 단계, 이미지 1/1

    • Lift battery release up to remove battery cover.

    편집

  3. Garmin GPSmap 60CSx Keypad Buttons Replacement: 3 단계, 이미지 1/2 Garmin GPSmap 60CSx Keypad Buttons Replacement: 3 단계, 이미지 2/2

    • Pull AA batteries out.

    편집

  5. Garmin GPSmap 60CSx Keypad Buttons Replacement, Keypad Buttons: 4 단계, 이미지 1/2 Garmin GPSmap 60CSx Keypad Buttons Replacement, Keypad Buttons: 4 단계, 이미지 2/2

    • Remove the six 10 mm screws on the back of the device with a Phillips #0 screwdriver.

    • Flip the back panel over to view the green electronics board (the PCB) and the PCB covering.

    • Remove the black, yellow, blue, and red wires connected to the PCB with light force.

    편집

  6. Garmin GPSmap 60CSx Keypad Buttons Replacement: 5 단계, 이미지 1/1

    • Place the spudger in the bottom right corner of the black PCB cover and pry the corner out.

    • The previous step will need to be done to the other three corners.

    • It is best to do the two bottom corners first.

    • Pull the black PCB board out of the GPSMap 60 CSx.

    편집

  7. Garmin GPSmap 60CSx Keypad Buttons Replacement: 6 단계, 이미지 1/2 Garmin GPSmap 60CSx Keypad Buttons Replacement: 6 단계, 이미지 2/2

    • Carefully use a spudger to lift the PCB a few centimeters.

    • Pull the PCB out towards the bottom of the GPSMap 60CSx.

    • This will pull out all the main components including the antenna and the screen.

    편집

  8. Garmin GPSmap 60CSx Keypad Buttons Replacement: 7 단계, 이미지 1/2 Garmin GPSmap 60CSx Keypad Buttons Replacement: 7 단계, 이미지 2/2

    • Take the front panel and apply light force to the buttons.

    • The buttons are part of one unit and should all pop out at once.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Thomas Humphrey

회원 가입일: 04/05/18

540 평판

안내서 4개 작성하였습니다

배지: 10

배지 +7개 더

팀

Linn Benton Community College, Team S2-G5, Johnson Spring 2018 Linn Benton Community College, Team S2-G5, Johnson Spring 2018 회원

LBCC-JOHNSON-S18S2G5

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 18

전체 시간: 2,607