소개

If your power button is defective, replace the old one with the new power button.

Remove the barcode sticker at the bottom of the device.
  • Remove the barcode sticker at the bottom of the device.

댓글 쓰기

Remove two 8.4 mm T5 screws from the bottom of the device.
  • Remove two 8.4 mm T5 screws from the bottom of the device.

댓글 쓰기

Using a plastic opening tool, carefully pry open the device. Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.
  • Using a plastic opening tool, carefully pry open the device.

  • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

turn the unit around

Andrew Hayden - 답글

Since there is no replacement speaker whats the point of this process?

greg - 답글

Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

Harold Schultz - 답글

Remove the power button. Remove the power button.
  • Remove the power button.

Where can I buy the button

milosvalek - 답글

결론

To reassemble your device, follow these instructions in reverse order.

Timothy

회원 가입일: 2012년 01월 26일

35 평판

안내서 3개 작성하였습니다

Cal Poly, Team 9-3, Regan Winter 2012 Cal Poly, Team 9-3, Regan Winter 2012 회원

CPSU-REGAN-W12S9G3

5 회원들

안내서 4개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 22

전체 시간: 9,023