소개

The cooling assembly is made up of a cooling fan and a large piece of copper to help dissipate heat out of the bottom of your laptop. Over time, the fan can wear out and it will need to be replaced.

부품

부품은 필요하지 않습니다.

  1. Loosen the seven 6 mm Phillips #0 screws on the back of the case.
    • Loosen the seven 6 mm Phillips #0 screws on the back of the case.

    • Leave all the screws in the back plate and so you don't lose them.

    댓글 쓰기

  2. Pull upwards on the top of the back cover to remove it.
    • Pull upwards on the top of the back cover to remove it.

    댓글 쓰기

  3. GIVE TOOLS. FIX FOREVER.

    GIVE TOOLS.

    FIX FOREVER.

    Spread the Fixmas cheer.

    GIVE TOOLS. FIX FOREVER.

    Spread the Fixmas cheer.

    • Remove the four 9 mm Phillips #0 screws from the cooling assembly.

    댓글 쓰기

    • Gently and carefully remove the cooling assembly to avoid ripping the wire attaching it to the computer.

    • Gently flip the cooling fan assembly upside-down on the computer surface.

    • Carefully grab the wire attached to the computer and pull away from the port.

    • The cooling fan is now safe for removal.

    댓글 쓰기

    • When reinstalling heat sink and fans clean off the old thermal paste from both the heat sink and the CPU and then add new paste to CPU

    • If your unfamiliar with applying thermal paste How to Apply Thermal Paste

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Chris Naughton

회원 가입일: 2014년 04월 07일

705 평판

안내서 5개 작성하였습니다

Cal Poly, Team 6-2, Forte Spring 2014 Cal Poly, Team 6-2, Forte Spring 2014 회원

CPSU-FORTE-S14S6G2

5 회원들

안내서 11개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 444