소개

You are going to remove the back cover, locate the RAM, take out the RAM, and either replace it or reinstall it.

Place the laptop so the back cover is facing up.
  • Place the laptop so the back cover is facing up.

댓글 쓰기

Remove the 8 screws from the back cover using the Phillips #00 screwdriver.
  • Remove the 8 screws from the back cover using the Phillips #00 screwdriver.

댓글 쓰기

  • Lift off the cover.

댓글 쓰기

  • Identify the RAM, which is a stack of two green cards in the upper left-hand corner.

댓글 쓰기

  • There are silver tabs on both sides of the ram. Simultaneously push the silver tabs outward.

댓글 쓰기

  • The card pops up 20 degrees and is loose enough to remove with your hand.

  • Carefully pull the card to the right horizontally.

댓글 쓰기

  • Follow the same steps for the second RAM card, which is under the one you just removed.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Toni Pipes

회원 가입일: 2010년 10월 05일

297 평판

안내서 7개 작성하였습니다

Cal Poly, Team 21-31, Regan Fall 2010 Cal Poly, Team 21-31, Regan Fall 2010 회원

CPSU-REGAN-F10S21G31

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 4

전체 시간: 4,086